Rockville 2-way Active USB Studio Monitor Speakers - $100 (Slocomb or Dothan, AL.)

Rockville 2-way Active USB Studio Monitor Speakers 1 thumbnailRockville 2-way Active USB Studio Monitor Speakers 2 thumbnailRockville 2-way Active USB Studio Monitor Speakers 3 thumbnail
957 W. Lawrence Harris Hwy
condition: excellent
make / manufacturer: Rockville
size / dimensions: 10.2"H×7.4"W×9.8"D

more ads by this user


Amplifier: Class D Mono Block

Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifier.

Low-Mid Frequency: 8 Polypropylene Cone with Rubber Sourround

High-Frequency: 1" Neodymium Silk Dome Tweeter

Frequency Response: 30Hz - 20kHz

SPL Peak: 106dB @1w/1m

Speaker Power Output (per pair): 250 Watts RMS/500 Watts Peak

Power Output (per speaker): 125 Watts RMS/250 watts Peak

Tweeter Power Output: 30 Watts RMS

Speaker Impedance: 4 Ohm

Tweeter Impedance: 6 Ohm

Low Frequency Equalization Adjustment: -4dB - +4dB

High Frequency Equalization Adjustment: -4dB - +4dB

Input Connectors: Unbalanced RCA

Balanced 1/4"/TRS Combo Jack

USB 2.0

Ouput Connector: 3.5mm Balanced Headphone Jack

AC Power Input: 120V (60Hz)

Dimensions (H x W x D): 15.4" (390mm) x 9.92" (252mm) x 12.2" (310mm)

Weight: Active unit: 24 lbs (11 kg)

Slave unit: 9 lbs (4 kg)


Rockville 2-Way active/powered USB studio monitor speakers.

Quad amp design, each driver features frequency specific independent amplifiers.

Enclosure is made of top quality mdf wood. The enclosure to 0.5 Thick while the front board of it is a full 1" thickness to give you the ultimate best sound quality.

Comes in 3 enclosure finish options wood finish painted black, wood finish painted white, and wood finish with vinyl front board.

We use "baking paint" made for wood surface. It lasts long and is the best paint for speakers!

Beautiful finish is matte with a slight shine to it. Our designers spent a lot of time on the color to make it beautiful and elegant looking to improve the appearance of your studio or room.

The enclosure is built with the perfect amount of air space to maximize sound quality for a studio.

The port is built to the perfect spec to enhance the sound.

Full range class D amplifier circuitry with auto-switching power supply.

Led power on indicator on rear panel.

Ferro fluid enhanced neodymium silk dome tweeter with metal grill protection.

Curved front bezel design eliminates standing wave distortion.

Injection molded polypropylene cone woofer.

Rubber woofer surrounds increases sound quality and eliminates unwanted distortions.

Computer optimized electronic crossover network supplies amazing sounding highs. lows, and mids.

Rear-firing port shaped and designed by sound engineers to reduce port turbulence and deliver distortion free top sound quality!

We developed the most optimized magnet structure, cone, and cabinet space that reproduces the sound to play back exactly the way it was recorded!

Specially wound voice coils produce accurate response along entire frequency spectrum.

Distortion-free playback even at max volume listening! Very clean sound!

Our factory uses the latest precision glue machine (over 500 meter tunnel oven).

Thick "wadding" protects inside the speaker cabinet.

World class top of the line audiophile grade components! We use adau 1701 for audio processing and tpa3116 for amplification. These are both known to circuits designs. These components also are amazing and allow us to adjust the sound via soft programing on a computer during the design stage to get the perfect sound.

120 Volt (60Hz) AC power input.

Every speaker in production undergoes a computer generated sound check test to ensure it upholds to our specifications and standards.

We use a "6sigma" style quality assurance of each product (long story short, each product will work perfectly as advertised for a long long time).

•Transducer production line to make the spl performance stable.

• One complete pair with master/slave.

Includes a noise rejection cable to connect the 2 speakers together (this is a proprietary cable we use that connects the 2 speakers together without any unwanted noise) we also use a special cable tip that will not allow the user to plug the cable in back- wards.

post id: 7761440032



best of [?]